Seat Depth Adjuster Seat Cushion, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1-.

Courtesy of AUDI

-- Release the hooks -arrows-, and fold the retaining plate with cushion and cover toward the rear.

-- Disengage the tabs -arrows- from the seat depth adjuster -2- and move the support with cushion and cover upward.

Courtesy of AUDI

-- Remove the support -1- with cushion and cover for the seat depth adjuster upward and forward at the same time.

-- Remove the retaining channel -2- from the retainers -5-.

Fig 1: Identifying Cover -1-, Channels -2-, Seat Depth Adjuster Cushion -3-, Tabs -4- & Catches -5-

Courtesy of AUDI

-- Disengage the cover from the retainers -4- on both sides.

-- Remove the seat depth adjuster seat cushion -3- from the cover -1-.