Seat Heating Element, Removing And Installing, Temperature-Controlled Seat Bolsters
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The old seat heating element remains on the cushion and will be covered by the new heating element.
Procedure
- Seat cushion on seat pan removed. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING .
-- Cut the wire directly on the old heating element.
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
Further installation is performed in reverse order of the removal.
Tightening Specifications