Overview - Backrest Cover And Cushion, Standard Seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Backrest Cover And Cushion, Standard Seat

Courtesy of AUDI

Tab
- Sewn into cover
- For attaching the cover to the backrest frame
Clip
- Quantity: 2
- Replace after removing
Molding
- Sewn into cover
- For engaging the cover on the seat pan
- Check for proper seating
Tab
- Sewn into cover
- For attaching the cover to the backrest frame
Cover
- Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING
- Refer to BACKREST COVER AND CUSHION, SEPARATING
- Check that there are no folds after installing
Wire
- Encapsulated in cushion
- For securing the cover to the cushion
Contour Wire
- Pushed into the cover mounting pocket
- For securing the cover to the cushion
Upholstery Clip
- For securing the cover to the cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers:V.A.G 1634 .
Cushion
- Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING
- Refer to BACKREST COVER AND CUSHION, SEPARATING
- Equipment versions with seat heating: attach a new heating element when replacing. Refer to BACKREST HEATING ELEMENT, REMOVING AND INSTALLING .
Backrest Frame
Molding
- Sewn into cover
- For engaging the cover on the seat pan
- Check for proper seating
Clip
- Quantity: 2
- Replace after removing
Tab
- Sewn into cover
- For attaching the cover to the backrest frame
- Check for proper seating
Clip
- Quantity: 2
- Replace after removing
Tab
- Sewn into cover
- For attaching the cover to the backrest frame