Seat Occupant Detection System, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- The seat occupant detection system is only installed in the front passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and Front Passenger Occupant Detection Sensor -G128-) must always be installed.
- Exchanging of a component Passenger Occupant Detection System Control Module - J706- or Front Passenger Occupant Detection Sensor -G128- with another vehicle is not permitted.
- The parts of the service kit are different depending on the seat version. Refer to the appropriate Electronic Parts Information.
Special tools and workshop equipment required
- Pry Lever:80-200