Outer Rear Seat Backrest Locking Mechanism, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear seat backrest. Refer to OUTER REAR SEAT BACKREST, REMOVING AND INSTALLING .

-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Remove the rear seat backrest in the locking mechanism area. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, FOLDING BACKREST .

-- Unclip the release cable -1- from the bracket -5- on the rear seat backrest.

Fig 1: Identifying Release Cable From Locking Mechanism To Coupling Station - Avant

Courtesy of AUDI

-- Disengage the release cable from the locking mechanism -2- -arrow A-.

-- Remove the release cable nipple -4- from the release handle -3- -arrow B- and remove the release cable.

-- Remove the bolts -3-.

Fig 2: Identifying Bolts

Courtesy of AUDI

-- Remove the locking mechanism -2- from the backrest frame -1-.