LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Seat Side Trim On Tunnel Side, Removing And Installing >> Removing

Seat Side Trim On Tunnel Side, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Unscrew the front seat and tip forward with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the expanding rivets -3- and -4-.

Fig 1: Removing Expanding Rivets -3- And -4-
GWWA72-10874Courtesy of AUDI

-- Disengage the tunnel-side seat side trim -2- from the backrest hinge and remove it.

NOTE:

Make sure the tab -1- is not damaged when removing the seat side trim.

scientia non olet · About LEMON Manuals