LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Center Seat Rail Cover, Removing And Installing >> Removing

Center Seat Rail Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat into its highest position.

-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .

-- Release the rear hook at the inside of the seat rail -arrow-, and lift up the rear cover slightly.

GWWA72-12062Courtesy of AUDI

-- Release the upper center seat rail cover by sliding in the direction of travel, and remove it.