LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Functions Control Module, Removing And Installing >> Removing

Seat Functions Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Release the retaining tabs -arrows-.

Fig 1: Memory Seat/Steering Column Adjustment Control Module -J136-
GWWA72-12229Courtesy of AUDI

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.