LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Functions Control Module, Removing And Installing >> Installing

Seat Functions Control Module, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- If the control module was replaced, follow the sequence when connecting the connectors.

-- First connect the connector -5- (coding connector), then connect the other connectors -1- through -4-.

GWWA69-11209Courtesy of AUDI