LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Lumbar Support Air Cushion, Removing And Installing >> Removing

Lumbar Support Air Cushion, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING .

-- For reinstallation, mark pneumatic lines at the separating point with a waterproof permanent marker.

-- Disconnect the pneumatic lines at the markings -arrows-. Refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING .

GWWA72-12588Courtesy of AUDI
  1. Pneumatic Line to Upper Air Cushion
  2. Pneumatic Line to Center Air Cushion
  3. Pneumatic Line to Lower Air Cushion

-- Remove the clips -arrows-.

GWWA72-11841Courtesy of AUDI

-- Free up the mount -1- with the lumbar support air cushion and remove to the side. (Shown on a removed cover and cushion.)