LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Interior Equipment) >> 68 Interior Equipment >> Storage Compartments And Covers >> Glove Compartment Lid Damping Element, Removing And Installing >> Removing

Glove Compartment Lid Damping Element, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

Fig 1: Glove Compartment Lamp Switch -E26-
GWWA96-11548Courtesy of AUDI

-- Press the operating arm -3- out of the locking mechanism -arrow A-.

-- Release the switch -1- counter-clockwise -arrow B- and remove it.