Glove Compartment Handle, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Locking Pin (3 pc.):T40011 or Torx screwdriver T7, approximately 50 mm long, commercially available

Fig 1: Identifying Locking Pin T40011
Courtesy of AUDI
Scraper no. 1 from the Scraper Set:VAS 6845

Fig 2: Identifying Clip release lever no. 4 from the Scraper Set VAS6845
Courtesy of AUDI