Roof Grab Handle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the angled screwdriver -4- in the gap behind the expanding cap -2-.
CAUTION:
Risk of destroying the roof grab handle if the silicone brake and spring fall out.
- Only unclip the expanding caps -2- and -3- up to their lock position. Do not remove them completely.
-- Pivot the angled screwdriver -arrow-, until the expanding cap slides audibly into the lock position.
-- Repeat the procedure on the second expanding cap -3-.
-- Remove the roof grab handle -1- from the opening in the body.
-- Leave the expanding caps in the lock position in the roof grab handle.