Wiring Harness Repair Set - Copper:VAS631003
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
The Wiring Harness Repair Set - Copper:VAS631003 makes optimal repair quality possible in the realm of vehicle electronics. With this wiring harness-repair kit repairs can be performed on 10mm2 and 16mm2 wires in the area of the connections and on open circuits. The repair wires are also used an complete repair wires with already crimped on/connected contacts. The connection with the vehicle-specific wiring harness takes place with two different wire cross-sections butt connectors.
The Wiring Harness Repair Set - Copper:VAS631003 for 10mm2 and 16mm2 wires is comprised of the following components.
- Case with Inlays:VAS631003/1
- Hand Pliers:VAS631003/2
- Insulation Removal Tool:VAS631003/3
- Pair of Cable Cutters:VAS631003/4
- Exchangeable head 10mm2:VAS631003/5
- Exchangeable head 16mm2:VAS631003/6
NOTE:
Additional information:
Refer to the Wiring Harness Repair Set - Copper:VAS631003 Owner's Manual.