LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Single Wire Seal Assembly Tools

Single Wire Seal Assembly Tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Assembly tools serve the purpose of allowing the single wire seals to be slid without damage into the connector housing up to stop, this achieves a complete seal between single wire and connector housing.

Fig 1: Identifying Terminal Assembly Tool
GWWN97-10293Courtesy of AUDI OF AMERICA, LLC

Four assembly tools for single wire seals are components of the Wiring Harness Repair Set:VAS1978  and its previous versions.

Assembly of single wire seals. Refer to SINGLE WIRE SEALS, INSTALLING .