LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Fiber-Optic Cables, Repairing >> Fiber-Optic Cable, Disconnecting From Wiring Harness Connector >> Installing

Fiber-Optic Cable, Disconnecting From Wiring Harness Connector: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Cover the open connector -2- for the fiber-optic cable using the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9  -1-.

Fig 1: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9
GWWA97-0760Courtesy of AUDI OF AMERICA, LLC

The protective cap prevents contamination of or mechanical damage to end face of fiber optic cable which would impair signal transmission.

-- Install fiber optic cable in line with markings.