LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Battery, Starter, Generator, Cruise Control) >> 27 Battery, Starter, Generator, Cruise Control >> Starter >> Starter, Removing And Installing >> Starter, Removing And Installing, Vehicles With 4-Cylinder Engine >> Installing

Starter, Removing And Installing, Vehicles With 4-Cylinder Engine: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolt & Spacer Sleeve
GWWA34-10501Courtesy of AUDI

Install in the reverse order of removal while noting the following:

CAUTION:

There is a risk of damaging the starter through improper handling.

- Tighten the bolt only with the spacer sleeve installed between the starter and the transmission.

-- Connect the battery. Required actions. Refer to Connecting Battery .