LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Battery, Starter, Generator, Cruise Control) >> 27 Battery, Starter, Generator, Cruise Control >> Battery >> Battery, Removing And Installing >> Battery -A-, REMOVING AND INSTALLING, 0K0 AND 0K3 >> Removing

Battery -A-, REMOVING AND INSTALLING, 0K0 AND 0K3: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to Battery -A-, DISCONNECTING AND CONNECTING, 0K0 AND 0K3 .

Q5 TFSIe:

GWWA93-10961Courtesy of AUDI

-- Remove the impact protector -2-.

Continuation for all:

GWWA27-10659Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Place the battery bracket with the securing strap -3- toward the front.

-- Remove the battery cover -1-.

-- Open the cover -2- over the battery positive terminal.

-- Loosen the nut -5- several turns and remove the battery positive cable terminal clamp -6- from the battery terminal.

GWWA27-10660Courtesy of AUDI

-- Disconnect the central venting system hose -2-.

-- Lift the battery -3- up and out of the luggage compartment.