Battery, 48 V -A6-, VISUALLY INSPECTING AND CLASSIFYING
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Diagnostic Box: VAS 5581 if needed
- Diagnostic Cable:VAS 5581/14 if necessary
- Adapter Cable:VAS 5581/1A-2 if necessary, not required when using Diagnostic Box:VAS 5581A
Procedure
CAUTION:
Health risk due to toxic dust and fluids.
- Never work on a lithium-ion battery with a short circuit.
CAUTION:
There is a risk of burns due to a hot lithium-ion battery.
It is possible to burn hands.
- Do not touch a hot battery.
- Wear safety gloves.
The Battery, 48 V -A6- must be checked for:
- Cracks in the housing for the Battery, 48 V -A6-.
- Deformities in the housing for the Battery, 48 V -A6-.
- Changes in color due to temperature effects and housing discoloration.
- Leaking electrolyte.
- Contact damage.
- Presence of legible information and warning labels.
- Corrosion damage.
-- After the visual inspection, the Battery, 48 V -A6- must be classified.
-- Connect the Vehicle Diagnostic Tester.
- With the Battery, 48 V -A6- removed, use the Diagnostic Box:VAS 5581 with the Diagnostic Cable:VAS 5581/14 and the Adapter Cable:VAS 5581/1A-2 .
- Connect the black terminal from the Diagnostic Cable:VAS 5581/14 and Adapter Cable:VAS 5581/1A-2 on the negative terminal of the Battery, 48 V -A6-.
- The CAN bus terminating resistor on the Diagnostic Box:VAS 5581 is preset to 120 Ohm and must not be changed.
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Electrical system
- 01 - OBD-capable systems
- 0021 - Battery Management 2 (A6, C31)
- 0021 - Battery management 2, functions
- 0021 - Battery 48V - Conditional Assessment
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.