Ribbed Belt Pulley Without Freewheel, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the generator if necessary. Refer to GENERATOR, REMOVING AND INSTALLING .
-- For some engine types the removal can be performed with the generator still installed, here only the ribbed belt must have the tension released and be removed.
-- If present, press the protective cap off the generator pulley.
-- Counterhold nut using :3310 and rotate generator shaft clockwise to loosen it.
-- Remove ribbed belt pulley.