LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electric Drive) >> 93 Electric Drive >> Potential Equalization Cables >> Potential Equalization Cable, Removing And Installing >> POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Electric Drive Power and Control Electronics -JX1-, AUDI Q5 >> Removing

POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Electric Drive Power and Control Electronics -JX1-, AUDI Q5: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

There is a risk of fatal injury due to high voltage.

Electrocution by direct contact or electric arc can cause severe bodily injury or fatal injury.

- Have an Audi high-voltage technician (HVT) or an Audi high-voltage expert (HVE) de-energize the high-voltage system.

-- De-energize the high-voltage system. Refer to HIGH-VOLTAGE SYSTEM, DE-ENERGIZING .

-- Remove the left impact guard. Refer to OVERVIEW - UNDERBODY TRIM PANELS .

-- Remove the bolt -3- and the nut -1-.

GWWA93-11093Courtesy of AUDI OF AMERICA, LLC

-- Remove the potential equalization cable -2-.