LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electric Drive) >> 93 Electric Drive >> Potential Equalization Cables >> Potential Equalization Cable, Removing And Installing >> POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Electric Drive Power and Control Electronics -JX1-, AUDI Q5 >> Installing

POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Electric Drive Power and Control Electronics -JX1-, AUDI Q5: Installing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- After installing high-voltage components or potential equalization cables a potential equalization measurement must be performed on the applicable high-voltage components. Refer to POTENTIAL EQUALIZATION MEASUREMENT .

CAUTION:

There is a risk of fatal injury due to high voltage.

Electrocution by direct contact or electric arc can cause severe bodily injury or fatal injury.

- Have an Audi high-voltage technician or an Audi high-voltage expert bring the high-voltage system back into service.

-- Re-energize the high-voltage system. Refer to HIGH-VOLTAGE SYSTEM, RE-ENERGIZING .