Mounting Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the accelerator pedal module. Refer to ACCELERATOR MECHANISM .
-- Install the brake pedal. Refer to BRAKE PEDAL, REMOVING AND INSTALLING .
-- Bring the mounting bracket with the installed brake pedal and accelerator pedal module into the installation position.
- The mounting bracket must be seated in the bulkhead guides and all stud bolts.
-- Connect the brake pedal to the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.
-- Install the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .