Hid Headlamps Usage And Safety Precautions

Risk of injury due to electrocution

When the headlamps are switched on, the HID headlamp components marked with the yellow high-voltage symbol are under high voltage. Electric shock may occur if components are contacted.

-- Never touch the components marked with the yellow high-voltage symbols when the lighting is switched on.

-- When performing procedures, switch off the ignition and all electrical equipment, and place the ignition key outside of the vehicle.

-- Do not operate the flashers.

Risk of injury from burning, UV radiation, blinding and explosions of the HID headlamp bulbs.

-- Only operate the HID headlamp bulb in the headlamp housing.

-- Do not look in the light beam.

-- Avoid contact with burst bulb glass.

-- Remove and install the HID headlamp bulb with protective eyewear and gloves.