Vehicle From Below, Checking For Damage
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Check the underbody carefully and completely for damage and loose connecting elements.
-- If there are defects, replace the damaged component or replace any missing fasteners.
High-voltage components, checking:
- Only applies to PHEV vehicles!
CAUTION:
Hybrid vehicles have a high-voltage system with a very high voltage. Risk of electrocution. Note the safety precautions! Refer to HIGH-VOLTAGE VEHICLE GENERAL INFORMATION
- All work on vehicles with a high-voltage system may only be performed by technicians that are certified as "technicians trained in electrical systems".
- Contact to the responsible high-voltage technician or expert if something needs clarification.
Pay attention to the high-voltage and coolant lines in the visible area during the inspection of the high-voltage components in the underbody area!
Note the following:
- The high-voltage components must not show any damage on the outside.
- The insulation on the high-voltage cables must be intact and not have any damage.
- Pay attention to unusual distortion of the high-voltage cable.
- Pay attention to leaks in the coolant lines.
NOTE:
Inform the responsible high-voltage technician immediately if something seems wrong or missing.