Vehicle Diagnosis, Closing And Sending The Diagnostic Log
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Perform the test programs according to the test plan.
-- Switch to the control modules tab.
-- Press the X Diagnosis button and end the diagnosis.
-- Send the diagnostic log online.
NOTE:
Deleting the DTC memory takes place when exiting the Guided Fault Finding,
Sending the diagnostic log takes place when exiting the Guided Fault Finding,
If there is no network connection available, the diagnostic log is temporarily saved a few days. The online transfer should then take place as soon as possible.