LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (General Information - Maintenance) >> General Information - Maintenance >> Maintenance Work >> VINS, Checking Consistency And Impression

VINS, Checking Consistency And Impression

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Only applies to vehicles in the Chinese market.

The VINs on the vehicle must be checked for consistency and for even and clear impressions. Make sure that all of the stickers on the vehicle have the same VIN and that they match the number stamped in the engine/motor compartment. None of the stamped numbers or letters should be slanted or unclear.

Procedure: 

For vehicles in the Chinese market, the VIN is found in the following areas: