Instrument Cluster, Checking Indicator Lamps
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Reading out the DTC memory is a repair procedure and should be charged separately.
Procedure:
-- Start the engine and wait for the vehicle function test to end.
-- Check if the indicator lamps in the instrument cluster turn on.
-- Check the error messages in the driver information system (DSI).
-- Turn off the engine.
-- For the relevant indicator lamps, read out the DTC memory. Refer to DTC MEMORY, CHECKING .
NOTE:
The duration of the vehicle function test depends on the model and vehicle equipment.