Engine, Transmission, Final Drive And Steering, Checking For Leaks And Damage
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Remove the noise insulation at every inspection.
Removal Procedures:
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
Procedure:
-- Check the engine and its attachments from below for leaks and damage.
-- Check the belt drive in the visible area for damage.
-- Check the radiator and coolant circuit for leaks and damage.
-- Check the refrigerant circuit consisting of the A/C compressor, condenser and refrigerant lines, including the connections, for damage.
-- Check the transmission, final drive and steering for leaks and damage.
-- If there are defects, repair or replace the respective component.