LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (General Information - Maintenance) >> General Information - Maintenance >> Maintenance Work >> Connectivity Box, Checking Emergency Battery

Connectivity Box, Checking Emergency Battery

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Procedure: 

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select the Diagnostic  mode and start the diagnosis.

-- Perform the vehicle identification.

-- Set and press Accept  to select "Work with Guided Fault Finding".

-- Switch to the "Special Functions" tab and select the following program:

-- Start the program using Perform test...  .

-- Continue the program sequence.