LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (General Information - Maintenance) >> General Information - Maintenance >> Maintenance Work >> Brake Fluid Level, Checking >> Testing Values and Process Specifications Table:

Testing Values and Process Specifications Table:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Service: Fluid Level Specified Value:
Delivery service Fluid level at the MAX mark.
Changing the brake fluid Fluid level between the MAX and MIN mark, consistent with the wear condition of the brake pads.

The leak test for the brake system is a repair procedure and should be charged separately.

Procedure: 

-- Determine the brake fluid level according to the marks on the brake fluid reservoir.

Fig 1: Brake Fluid Reservoir
GWWA47-10258Courtesy of AUDI OF AMERICA, LLC

-- Perform the following actions depending on the test result:

Fluid level: Evaluation / Action:
Over the MAX mark Extract the brake fluid.
Under the specified level Perform a leak test for the brake system. Refer to LEAK TEST .
NOTE:

Due to wear and the automatic adjustment of the brake pads while driving, the brake fluid level lowers.