Battery: Reading Out Condition
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Select the Diagnostic mode and start the diagnosis.
-- Perform the vehicle identification.
-- Set v and press Accept to select "Work with Guided Fault Finding".
-- Switch to the "Special Functions" tab and select the following program:
- A - Battery, Checking
-- Start the program using Perform test... .
-- Continue the program sequence.
-- The following actions are derived from the test result:
| Vehicle Diagnostic Tester result: | Action: |
|---|---|
| "Battery is OK" | No further action is necessary. |
| "Battery, Charging" | Charge the battery. Refer to BATTERY, CHARGING . |
| "Battery no longer meets the delivery quality" | Replace the battery. Refer to BATTERY, REMOVING AND INSTALLING . |
NOTE:
A functioning network connection is required for sending the diagnostic log online.