LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Wheels, Tires, Wheel Alignment (Suspension, Wheels, Steering)) >> 44 Wheels, Tires, Wheel Alignment >> Dynamic Steering >> Active Steering Control Module -J792-, REMOVING AND INSTALLING >> Removing

Active Steering Control Module -J792-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the footrest. Refer to FOOTREST, REMOVING AND INSTALLING .

-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Free up the left front carpet and lift up slightly.

-- Remove the bolts -arrows-.

GWWA44-10529Courtesy of AUDI

-- Pull the Active Steering Control Module -J792- out slightly and disconnect the connectors -2 and 3-.

-- Remove the control module.