Dimension Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
| Chassis | Distance between the Center of the Wheel and the Lower Edge of the Fender/Wheel Housing | ||||||
|---|---|---|---|---|---|---|---|
| Front Axle | Rear Axle | Tolerance between the right and left | |||||
| Specified size. Refer to (1). | Tolerance | Specified size. Refer to (1). | Tolerance | ||||
| 1BK | 451 mm | ± 7 mm | 452 mm | ± 7 mm | Less than or equal to 10 mm | ||
| 2MB | 446 mm | ± 7 mm | 447 mm | ± 7 mm | Less than or equal to 10 mm | ||
|
|||||||
CAUTION:
Risk of faulty axle alignment.
- If the standard vehicle height is not OK the axle alignment must not be performed. Refer to STANDARD VEHICLE HEIGHT, READAPTING .