LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Sunroof (Fy)) >> 60 Sunroof >> Sliding Sunroof >> Wind Deflector Bearing, Removing And Installing >> Removing

Wind Deflector Bearing, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the glass panel so that it is tilted all the way.

-- Push the retainers slightly to the side -arrows-.

GWWA60-10583Courtesy of AUDI

-- Remove the bearing for the wind deflector upward.

scientia non olet · About LEMON Manuals