Tilting Mechanism Guide Rail, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Check if all sliding pieces -1- with springs -3- are on the tilting mechanism guide -2-.
-- Insert the bottom of the tilting mechanism guide -4- into the mount for the guide rail -arrow-. While doing so, the arm -2- must engage in the opening -3-.
-- Press the entire length of the tilting mechanism guide into the inner guide rail. The sliding pieces -1- must slide into place at the same time.