LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Sunroof (Fy)) >> 60 Sunroof >> Sliding Sunroof >> Sunroof Shade, Removing And Installing >> Removing

Sunroof Shade, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear glass panel. Refer to GLASS PANEL, REMOVING AND INSTALLING, REAR .

-- Move the sunroof shade approximately 300 mm toward the front.

-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

-- Remove the bolt -arrow-.

GWWA66-11738Courtesy of AUDI

-- Remove the cross bar -1- to do so remove the left and right bolts -arrows-.

GWWA60-10589Courtesy of AUDI

-- Push the sunroof shade slightly to the left -arrow A-, so that the right securing hole on the sunroof shade is free.

GWWA60-10591Courtesy of AUDI

-- Insert the :T40011  into the securing hole.

-- Press the sun shade arch -2- forward -arrow- and hold.

GWWA66-11709Courtesy of AUDI

-- Using a screwdriver -3-, release the retainer -1- in the slide block -2- at the same time.

-- Turn the right sunroof shade bearing, until it can be removed downward from the guide on the sunroof frame.

-- Remove the sunroof shade toward the rear with all of the slide blocks out of the guide.

-- Remove the sunroof shade.