LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Sunroof (Fy)) >> 60 Sunroof >> Sliding Sunroof >> Sunroof Shade, Removing And Installing >> Installing >> Notes

Sunroof Shade, Removing And Installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Insert the slide block -1- into the front sun shade arch -2- and on the sun shade material -3-.

GWWA66-11710Courtesy of AUDI

-- Tension the sunroof shade with the :T40011  still inserted in the securing hole a total of six turns -arrow-.

Fig 1: Tensioning Sunroof Shade
GWWA60-10592Courtesy of AUDI
NOTE:

The sunroof shade mount only fits in one position in the sunroof frame.

-- Insert the sunroof shade in the pretensioned condition in the sunroof frame.