Sunroof Frame, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Have the two technicians bring the sunroof frame in the installation position and install the nuts all the way.
-- Tighten the nuts laterally first in the front and then the rear
-- Tighten the nuts diagonally lengthwise.
Further installation is performed in reverse order of removal, while noting the following:
-- Perform an adaptation. Refer to Power Sunroof Control Module -J245-, PROGRAMMING .
Tightening Specifications
- Refer to OVERVIEW - SLIDING SUNROOF