LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Interior Trim) >> 70 Interior Trim >> Vehicle Interior Trim Panels >> Sill Panel, Removing And Installing >> Removing

Sill Panel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat / bucket seats. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Remove the side cushion. Refer to SIDE CUSHION, REMOVING AND INSTALLING .

-- Free up in the sill panel in the area of the inner door seal.

-- Starting at the front, unclip the sill panel -1- from the side sill and the side panel using the Trim Removal Wedge :3409  -arrow A- and -arrow B-.

GWWA70-12634Courtesy of AUDI OF AMERICA, LLC

-- Pull the sill panel downward off the C-pillar trim panel and remove it.