Overview - Rear Lid Lower Trim Panel
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Upper Trim Panel
- Clip
- Quantity: 8
- Remove any clips still in the rear lid mounting points using the Omega Clip Tool :T40280 and insert into the trim panel to install
- Replace damaged or deformed clips
- Rubber Buffer
- Quantity: 5
- Emergency Triangle Cover
- Engaged in the rear lid trim panel
- Cover
- For the tail lamp
- Refer to TAIL LAMP COVER, REMOVING AND INSTALLING
- Emergency Release Cover
- Unclip using the Trim Removal Wedge :3409
- Clip
- Quantity: 10
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rubber Buffer
- Quantity: 6
- Rear Lid Latch Trim Panel
- Expanding Nut
- Quantity: 2
- Rear Lid Lower Trim Panel
- Bolt
- Quantity: 2
- 2 Nm
- Lock Bolt
- Clip into the knob
- Knob
- Expanding Rivet
- Quantity: 2
- Removing with Pliers :T40172C