LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Rear Doors (Fy)) >> 58 Rear Doors >> Door Components >> Outer Window Shaft Strip, Removing And Installing >> Removing

Outer Window Shaft Strip, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the door window into the "open" position.

-- To prevent damage, tape off the :3370  and the C-pillar trim with adhesive tape -2-.

-- Guide the :3370  from behind in the window shaft strip -arrow A-.

GWWA58-10393Courtesy of AUDI

-- Remove the window shaft strip with the :3370  carefully in the rear area upward from the door flange -arrow C-.

-- Remove the window shaft strip with both hands to the B-pillar from the door flange -B arrows-.