Housing, Removing And Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the cap -arrow-.
-- Pull the door handle -1- all the way -arrow A- and hold it.
-- Remove the clamping screw -3- all the way using a screwdriver -5-
-- Push the retaining bracket -4- for the housing inward until it engages -arrow B-.
- The door handle is now locked in the "open" position.
-- Remove the housing -2- from the mounting bracket.
Installing
Install in reverse order of removal.
Tightening Specifications