Overview - Windshield
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Windshield
- Distance to roof frame: dimension -c- = 2.5 mm
- Center the side distance to the A-pillars
- Adhesive Bead
- Observe the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Note the different distances to the window edge
- Dimension -a- = 6 mm
- Dimension -b- = 7 mm
- Dimension -d- = 6 mm
- Adhesive bead thickness. Refer to Applying adhesive: .
- Roof Frame
- Plenum Chamber Cover Frame
- No replacement part
- with a new window glass remove the protective piping. Refer to Fig 1.
- Plenum Chamber Cover
- Only press into retaining strip after window adhesive minimum curing time is complete (two hours).
- Remove the protective piping before assembling. Refer to Fig 1.
- Removing and Installing. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
- Molding
- Must not be damaged in the visible area
- Drip Rail
- Removing and Installing. Refer to DRIP RAIL, REMOVING AND INSTALLING .
Protective Molding, Removing
-- For a new windshield -3-, the protective molding -1- must first be removed from the frame -2- before assembling the plenum chamber cover.