LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Glass, Window Regulators (Fy)) >> 64 Glass, Window Regulators >> Side Windows >> Rear Side Window, Removing And Installing >> Undamaged Side Window, Removing

Undamaged Side Window, Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

-- Remove the left and right C-pillar trim panel. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the left and right D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- In the window glass cutting area, protect the side panel and roof against paint damage with adhesive tape.

CAUTION:

Risk of injury to the hands and eyes from glass fragments.

Getting cut is possible.

- Wear protective eyewear.

- Wear safety gloves.

-- Cut through the adhesive bead from the vehicle interior all around the side window using the :VAG1561A  and :VAG1561/22  . This also cuts through the locating pins on the side window.

GWWA64-10525Courtesy of AUDI

-- Loosen the trim molding from the side window molding. Refer to TRIM MOLDING, REMOVING AND INSTALLING, SIDE WINDOW .