Sunroof Motor -V1-, PROGRAMMING
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 00CA - Sunroof Control Module J245
- 00CA - Sunroof Control Module J245, Functions
- 00CA - Basic setting
- J245 - Sunroof Control Module, no basic setting
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.