Overview - Rear Side Window

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.

Courtesy of AUDI

Rear Side Window
- Removing and Installing. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .
- After installing, push in using the fasteners
Adhesive Bead
- Observe the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Note the different distances to the window edge
  - Dimension -a- = 12.5 mm
  - Dimension -b- = 12.5 mm
  - Dimension -c- = 8 mm
- Adhesive bead thickness. Refer to Adhesive application: .
Molding
- Must not be damaged in the visible area
Retainer
- No replacement part
- Is cut through when removing the window.
Pop Rivet
- There must not be any burrs on the rivet head when riveting