Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cap -arrow-.
-- Remove the screw -3- until it stops using a screwdriver -4-.
-- Push the retaining bracket -2- for the housing inward until it engages -arrow B-.
-- Pull the door handle -1- all the way to the "open" position -arrow A- and hold it.
-- Remove the housing with the cap -5- from the mounting bracket -arrow C-.