Mounting Bracket, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Before installing the mounting bracket, check if the backing plates -1 and 2- are inserted correctly.
-- Bring the mounting bracket -2- into the installation position and on the outer door panel -1- -arrows-.
Install in reverse order of removal.
- Equipped on some models: the wiring harness for the exterior door handle touch sensor/exterior door handle illumination must be routed on the mounting bracket, that points to the outer door panel.
TIP:
If the wiring harness is not routed correctly, there may be noises when opening and closing the door window, because the door window grazes the wiring harness.