Inner Window Shaft Strip, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- Remove the exterior rearview mirror. Refer to EXTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
-- Remove the studs -2- and adhesive surfaces -3- on the sealing pieces of the inner window shaft strip -1- from the inner door panel.
-- Remove the inner window shaft strip -1- upward -arrow-.
-- Remove the A-pillar seal -4- upward from the door shell. While doing so, the window guide strip -5- is removed from the guide rail -6- for the door window.